We manufacture closures for cosmetic and personal care bottles, jars and tubes: disc tops, flip tops, child-resistant caps, droppers, screw caps and metal caps, with the liner or seal each formula needs. Every closure is specified to the bottle it ships on and matched to it in color and finish, as one set: one color reference, one sample round, one lead time.
Three questions choose the closure. Answer them, give us the bottle, and we can specify the cap, the liner and the finish as one set.
In 24/410, 24 is the neck diameter in millimeters and 410 the thread style. A cap only fits a bottle with the same diameter and thread, so we specify the closure and the bottle together.
Every closure family we make, side by side. Each one is matched to your bottle by neck finish and specified against your formula at sampling.
| Closure | Dispensing action | Liner or seal | Finishes | Suits |
|---|---|---|---|---|
| Disc top | Press the edge to tilt open | Molded seal or liner | Color, matte, electroplated collar | Shampoo, body wash, lotion, toner |
| Flip top | Lift a hinged lid | Molded seal | Color, matte | Lotions, sunscreen, body care |
| Push-pull | Pull the spout up, push down to close | Molded seal | Color, matte | Body care, travel and refill bottles |
| Child-resistant | Push down and turn | Liner, humidity control gasket | Color, matte, electroplated, printed | Cannabis, CBD, supplements |
| Dropper | Squeeze a bulb or press a button | Wiper in the neck | Color, matte, electroplated, anodized | Serums, oils, tinctures |
| Screw cap | None; unscrew to open | Standard, pressure-sensitive or foil liner | Color, matte, electroplated | Creams, jars, refills |
| Metal cap | None; a decorative closure | Liner | Zinc alloy or aluminum, plated or anodized | Perfume, premium glass |
| Orifice reducer | Drop by drop, through a fitted insert | The insert seals under the cap | — | Essential oils |
| Cork stopper | Pull out | Natural cork seal | Natural wood | Pre-roll tubes, glass vials |
MOQ 10,000 units per SKU on existing molds; full-custom tooling is quoted per project.
The dispensing closures in our range, each specified to the bottle it ships on. Follow the links for the full specification, formula guidance and lead times of each family.
Press one edge and the disc tilts open; release it and it closes flush. One-handed, with no lid to lift, for shampoo, body wash, lotion and toner.
Push-and-turn caps, CR droppers, squeeze-to-open pop tops and locking tins, with test reports to US 16 CFR § 1700.20 available on request.
Squeeze-bulb, push-button, child-resistant and graduated droppers, with glass or plastic pipettes cut to the bottle.
A hinged lid over a dispensing orifice: flip it up, squeeze, snap it shut. The everyday closure for lotion, sunscreen and body care bottles and tubes.
Pull the spout up to open and push it down to close: one-handed, with no lid to lose, for body care, travel and refill bottles.
Beyond dispensing closures, we supply the caps, seals and stoppers that finish a pack: decorative metal caps, tamper evidence, plain screw caps and specialist closures.
Metal gives a glass bottle weight in the hand and a true metal surface. We make die-cast zinc alloy caps, electroplated or colored, the heavy premium cap on fragrance, and lighter aluminum caps and collars, anodized or brushed.
A tamper-evident closure shows whether the pack has been opened. Many packs need it alongside child resistance.
Screw caps that simply close the bottle or jar: smooth or ribbed, matched to the container, with a standard, pressure-sensitive or foil liner chosen for the formula. For creams, balms and refills.
A small insert pressed into the neck of an essential oil bottle, so the oil leaves drop by drop instead of pouring. The screw cap closes over it.
Natural wood corks, tapered to seal the bottle tightly, for glass pre-roll tubes, vials and small glass bottles.
Caps with the applicator built in, so the closure carries the product to the skin: wands for lip gloss tubes, and slanted applicator tips on squeeze tubes.
The liner decides whether the bottle arrives sealed. Each closure takes the liner its formula and its filling line need.
Compressed between cap and rim when the cap is tightened.
Suits Most creams, lotions and dry productsAn adhesive layer bonds to the rim under the pressure of capping; no equipment needed.
Suits Dry products such as powders; occasionally thick creamsAn induction sealer bonds the foil to the rim: airtight and tamper-evident.
Suits Liquids and oils that must not leak in transitA pressure-sensitive liner needs no equipment; an induction liner needs an induction sealer on the filling line. Tell us how the bottle will be filled and shipped, and we specify the liner to match.
The cap is the part of the pack customers touch first. Every surface on it can be specified and matched to the bottle it closes.
Discuss your color and finishChoose a finish
Cap matched to the bottle from a physical color sample, so the set reads as one set under store lighting.
Production, 10,000 sets 30 days for custom-color capsA matte, soft-touch cap, often paired with a frosted bottle or jar.
Frosting adds 5–7 days at samplingColors and gradients across cap and bottle, run on our own spraying lines.
Production, 10,000 sets 30 daysChrome, gold, rose gold or brushed finishes, matched from a physical sample.
Production, 10,000 sets 35 days for electroplated capsLogo on the cap top or side, from vector artwork built to the cap.
Printing on caps adds 3–4 days at samplingAn aluminum cap or shell anodized in color, for a true metal surface.
Production, 10,000 sets 45 days for anodized aluminum capsChanges are made on existing tooling, drawn from more than 30,000 ready-to-use molds.
A tooling project: our in-house Mold Manufacturing Center builds a steel mold in 35–40 days.
Standard lead times for caps and liners, counted in days from receipt of vector artwork and payment. Your quotation confirms the timeline for your specification.
Request a timeline for your projectFull-custom tooling is quoted per project. Production files: vector artwork in AI or PDF format, plus Pantone references or physical color samples.
Sampling
Production, 10,000 sets
Tooling and shipping
The questions buyers ask most before they specify a closure. If yours is not here, send it with your product details and we will answer it against the real pack.
Ask about your closureStart with how the product should leave the bottle: a disc top, flip top or push-pull cap for lotions, shampoo and body wash, a dropper for serums and oils, an orifice reducer for essential oils, and a screw cap for creams and jars. Then add the liner or seal the formula needs, and a child-resistant closure if the product must be kept away from children.
The first number is the neck diameter in millimeters; the second is the thread style. A cap only fits a bottle with the same diameter and thread, which is why we specify the closure and the bottle together.
A child-resistant closure stops a young child from opening the pack and stays child-resistant when reclosed. A tamper-evident closure, such as a breakaway band, shrink band or induction seal, shows whether the pack has been opened. Many packs need both.
A standard liner for most creams, lotions and dry products; a pressure-sensitive liner for powders and other dry products; and a foil induction liner for liquids and oils that must not leak in transit, which also makes the pack tamper-evident.
Yes. Caps can be electroplated in chrome, gold, rose gold or brushed finishes, made in anodized aluminum, or die-cast in zinc alloy and plated, as well as color-matched, frosted, spray-coated and printed.
MOQ is 10,000 units per SKU on existing molds. A custom-color cap sample takes 15–20 days; production of 10,000 caps takes 10–12 days in a stock color and 20–25 days in a specified color, counted from receipt of vector artwork and payment.
Every closure and pump we make is specified to the bottle it ships with. Explore the closure families in detail, or the pumps that dispense a measured dose.
Disc Caps
Disc CapsPress-to-open caps for shampoo, body wash and toners.Explore
All Pumps
All PumpsEvery pump family, with the spec table, viscosity guide and neck-finish reference.Explore
Child-Resistant Closures
Child-Resistant ClosuresPush-and-turn caps, CR droppers, pop tops and tins.Explore
Lotion Pumps
Lotion Pumps1.0–4.0 ml per stroke for creams, lotions and body care.Explore
Droppers
DroppersSqueeze-bulb, push-button and child-resistant droppers.Explore
All Caps and Pumps
All Caps and PumpsEvery pump, cap, closure and dropper in one place.Explore
17th Floor, East Tower, Building 2,
Yiyun Tech Innovation Center,
No. 33-13, Jinshi Third Road, Dayuan Street,
Baiyun District, Guangzhou City,
Guangdong Province, China
Office 10, 24th Floor,
The One Tower,
943 Sheikh Zayed Road,
Barsha Heights (Al Thanyah First),
Dubai, United Arab Emirates
© Copyright 2026 Jarsking Packaging All Rights Reserved.
