Caps and Pumps

Pumps, caps, closures and droppers for cosmetic and personal care bottles, made to fit the bottle they ship with: one color reference, one sample round, one lead time.

Caps and Pumps Matched to Your Bottle

We manufacture the dispensing and closing components of a cosmetic pack, and make them to fit the bottle or jar they are sold with. Four things are specified together, so the pump or cap and the container arrive as one set.

Neck finishTooled to the bottle neck, diameter and thread, such as 24/410.
Dip tubeCut to the internal height of the bottle it ships with.
CorMatched across materials from a physical color sample, so cap and bottle read as one.
FinishMatte, gloss, spray-coated or electroplated, specified for the whole set.

30,000+ready-to-use molds
10,000units per SKU MOQ
35–40 daysfor a new steel mold

Browse by Type

Each family has its own page, with the specification table, the options we tailor and the lead times. Start from the job the component has to do.

Bombas

All pumps

Closures and caps

All closures and caps

Outputs and Neck Finishes at a Glance

Output per stroke and neck finish for each pump and dispensing cap, in one table. Output and neck finish on your program are confirmed against your formula and your bottle at the sampling stage.

Cosmetic pumps and dispensing caps with output per stroke, neck finishes and typical uses
Component	Output per stroke	Neck finishes	Typically specified for
Serum pump	0.12–0.25 ml	18/41020/41024/410	Serums, essences, facial oils
Lotion pump	1.0–4.0 ml	20/41024/41028/410	Lotions, creams, body care
Fine mist sprayer	0.08–0.15 ml	18/41020/41024/410	Toners, setting sprays, fragrance
Foamer pump	0.4, 0.8 or 1.5 ml	40 mm42/41043/410	Facial cleansers, hand soap
Mini trigger sprayer	0.20–0.30 ml	20/41024/41024/41528/410	Hair care, room and linen sprays
Standard trigger sprayer	About 0.8–1.3 ml	28/40028/410	Larger formats, salon, home and pet care
Disc cap	Squeeze to dispenseNo fixed output per stroke	18/41020/41024/41028/410	Shampoo, body wash, toners
Push-pull cap	Squeeze to dispenseNo fixed output per stroke	24/41028/410	Squeeze bottles opened one-handed

Output bars use a logarithmic scale from 0.05 to 5 ml, because the families span a hundredfold range.

Acessórios

The parts that complete a pack: the liner under the cap, the tin and the applicator.

Liners and lids
Liners that seal the jar or bottle under the cap, including pressure-sensitive liners for dry cosmetics.
Liners and lids
Tin containers
Custom tins, including child-resistant pre-roll tins.
Tin containers
Brush caps and applicators
Lip gloss brushes and wands, in the closures and caps range.
Closures and caps

How a Set Is Quoted and Built

From brief to shipment, the pump or cap is specified with the bottle it ships with. Timelines start from receipt of vector artwork (AI or PDF) and payment.

01
Resumo
Container, formula, target output and finish.
02
Matching
The pump or cap is matched to the bottle in neck finish, dip tube length and color, from a physical color sample.
03
Sampling
Pump and cap samples in 7–25 days.
04
Production
10,000 sets of custom-color pumps or caps in 30 days; a complete program in 30–40 days.
05
Shipping
Sea freight in 35–40 days.

MOQ 10,000 units per SKU on existing molds. Full-custom tooling is quoted per project.Request a timeline for your project

Frequently Asked Questions

The questions buyers ask most before they specify caps and pumps. If yours is not here, send it with your formula and we will answer it against the real product.

Ask about your caps and pumps

What caps and pumps does Jarsking make?

Serum pumps, lotion pumps, fine mist sprayers, foamer pumps and trigger sprayers; disc caps, push-pull caps, child-resistant closures and screw caps; and droppers with glass or plastic pipettes. Each is made to fit the bottle or jar it ships with.

Can the pump or cap be matched to my bottle?

Yes. Neck finish, dip tube length, color and finish are specified together, and custom colors are matched from a physical color sample, so the component and the container arrive as one set.

What is the MOQ for custom caps and pumps?

10,000 units per SKU on existing molds. Full-custom tooling is quoted per project; a new steel mold takes 35–40 days in our in-house Mold Manufacturing Center.

How long do custom caps and pumps take?

Pump and cap samples take 7–25 days. Production of 10,000 custom-color pumps or caps takes 30 days, and a complete program 30–40 days, counted from receipt of vector artwork and payment. Sea freight takes 35–40 days.

Which neck finishes do your pumps and caps fit?

Common finishes include 18/410, 20/410, 24/410 and 28/410 for pumps and dispensing caps, 28/400 for standard triggers, and 40 mm, 42/410 and 43/410 for foamers. The finish is confirmed against your bottle at sampling.