A foamer pump turns a liquid into foam as it dispenses, by mixing it with air at the pump head, so the formula needs no propellant. We manufacture foamer pumps and foaming pump bottles for facial cleansers, hand soap, shampoo and sanitizing foams, from 100 ml airless refillable bottles to 220 ml cleanser bottles, as one set: one color reference, one sample round, one lead time.
A foamer pump has two pistons. On each press, the liquid piston draws a measured dose of a water-thin formula up the dip tube, while the air piston draws in air through vents in the collar. Both are pushed into a small mixing chamber and through a fine mesh screen, and leave the nozzle as foam, with no propellant. The pump is designed for about 10 parts air to 1 part liquid.
The standard specification, and what we tailor for each program. Neck, output and foam are confirmed against your formula and your bottle at the sampling stage.
| Specification | Standard | Tailored per program |
|---|---|---|
| Neck finish | 40 mm42/41043/410 | Matched to the bottle in the set |
| Output per stroke | 0.8 ml | 0.4 ml or 1.5 ml |
| Pump | بي بي | Custom color, matte or electroplated collar |
| Bottle | PET or PP, 130–220 ml | Airless refillable, 100 ml |
| Head | Foam nozzle | Silicone cleansing brush |
| Overcap | Clear | Color-matched |
| MOQ | 10,000 units per SKU on existing molds | Full-custom tooling quoted per project |
The neck follows the bottle, and the output follows the neck. The dose is liquid per stroke; it leaves the pump as many times that volume of foam.
air to liquid, by design: a small dose of formula leaves the nozzle as a much larger volume of foam.
A foamer can only foam what passes through its mesh, so the formula has to fit the pump. Viscosity is the first check.
Viscosity, in cps
Under about 100 cps, often much lower. Ordinary liquid soaps at 500–2,000 cps will not foam until diluted.
Foam comes from the surfactant. If the foam is weak, the surfactant concentration is usually too low.
Gums, some polymers and high-viscosity surfactants will not pass the mesh.
About 1 part castile soap to 4–5 parts distilled or deionized water, which also avoids mineral buildup in the mesh.
We test the foamer with your final formula at the sampling stage, before production starts.
Two things decide the foam: the mesh, and the ratio of air to liquid. Get the balance right and every press gives the same dense, even foam.
Large, loose bubbles in a wet foam, with liquid left underneath.
Small, uniform bubbles that hold their shape: the foam the pump is designed to give.
Light, open foam that collapses quickly.
We match the pump to your formula and test the foam at sampling, so it feels the way it should in the hand.
Three foaming formats, each supplied as a complete set with the pump, bottle and overcap matched in color and finish.
PET or PP bottles in 130, 150, 200 and 220 ml with a foamer pump.
An airless mechanism prevents backflow and oxidation, for natural or preservative-free formulas. At 100 ml (3.3 oz) it meets the TSA carry-on limit, and it is refillable.
A foamer head with a soft silicone brush, so the cleanser foams straight into the brush for facial cleansing.
Applications
Facial cleansers
Hand soap
Shampoo and hair care
Sanitizing foamsAlso baby foams and shaving mousse. See shampoo bottles.
A foaming bottle is used every day at the sink, so the pump, collar and bottle are specified together and matched as one set.
Discuss your color and finishChoose a finish
Pump, overcap and bottle matched from a physical color sample, so the set reads as one set under store lighting.
Production, 10,000 sets 30 days for custom-color pump headsA matte, soft-touch bottle.
Frosting adds 5–7 days at samplingColors and gradients across the bottle, run on our own spraying lines.
Production, 10,000 sets 30 daysChrome, gold or rose gold collars, matched from a physical sample.
Production, 10,000 sets 35 daysLogos and copy printed or foil-stamped onto the bottle, from vector artwork built to its actual dimensions.
Printing adds 3–4 days at samplingA foamer head with a soft silicone cleansing brush, so the cleanser foams straight into the brush.
Quoted per designChanges are made on existing tooling, drawn from more than 30,000 ready-to-use molds.
A tooling project: our in-house Mold Manufacturing Center builds a steel mold in 35–40 days.
Standard lead times for foamer pumps and bottles, counted in days from receipt of vector artwork and payment. Your quotation confirms the timeline for your specification.
Request a timeline for your projectFull-custom tooling is quoted per project. Production files: vector artwork in AI or PDF format, plus Pantone references or physical color samples.
Sampling
Production, 10,000 sets
Tooling and shipping
The questions buyers ask most before they specify a foamer pump. If yours is not here, send it with your formula and we will answer it against the real product.
Ask about your foamerA pump that turns a liquid into foam as it dispenses. Each press draws a dose of liquid and a volume of air, about 10 parts air to 1 part liquid, into a mixing chamber and through a fine mesh, so the formula leaves as foam without any propellant.
Typically 0.4, 0.8 or 1.5 ml of liquid per stroke, which leaves the pump as many times that volume of foam. 0.8 ml is the usual output for facial cleansers and hand soap in 150–250 ml bottles.
It needs to be water-thin, under about 100 cps, surfactant-based and free of thickeners. Ordinary liquid soaps at 500–2,000 cps have to be diluted first. We test the foamer with your final formula at the sampling stage.
The air chamber sits around the liquid chamber, so the pump body is much wider. Foamers use neck finishes such as 40 mm, 42/410 and 43/410; a 42/410 foamer cannot be fitted to a 24/410 bottle.
The mesh and the air-to-liquid ratio. Too little air gives wet, bubbly foam; too much gives airy foam that collapses quickly. We test the foam with your final formula at sampling.
Yes. Our 100 ml airless refillable foaming pump bottle prevents backflow and oxidation, suits natural or preservative-free formulas, and meets the TSA carry-on limit. We also make foamers with a silicone cleansing brush head for facial cleansers.
MOQ is 10,000 units per SKU on existing molds. A pump head sample takes 15–18 days in a stock color and 15–25 days in a specified color; production of 10,000 custom-color pump heads takes 30 days, counted from receipt of vector artwork and payment.
Every pump family we make is specified to the bottle it ships with. Explore the rest of the range, or step back to the full pumps overview.
All Pumps
All PumpsEvery pump family, with the spec table, viscosity guide and neck-finish reference.Explore
مضخات السيروم
مضخات السيروم0.12–0.25 ml per stroke for serums, essences and facial oils.Explore
مضخات لوشن
مضخات لوشن1.0–4.0 ml per stroke for creams, lotions and body care.Explore
بخاخات الرذاذ الناعم
بخاخات الرذاذ الناعمA fine, even spray for toners, setting sprays and fragrance.Explore
أغطية الأقراص
أغطية الأقراصPress-to-open caps for shampoo, body wash and toners.Explore
All Caps and Pumps
All Caps and PumpsEvery pump, cap, closure and dropper in one place.Explore
الطابق السابع عشر، البرج الشرقي، المبنى الثاني،,
مركز يييون للابتكار التكنولوجي،,
رقم 33-13، طريق جينشي الثالث، شارع دايوان،,
منطقة باييون، مدينة قوانغتشو,
مقاطعة قوانغدونغ، الصين
المكتب 10، الطابق الرابع والعشرون،,
برج ون,
943 شارع الشيخ زايد،,
برشا هايتس (الثنية الأولى)،,
دبي،, الإمارات العربية المتحدة
© حقوق النشر 2026 jarsking packaging جميع الحقوق محفوظة.
