A fine mist sprayer atomizes a liquid into a soft, even cone, typically 0.08–0.15 ml per spray, for toners, setting sprays, body mists and fragrance. We manufacture fine mist sprayers in 18/410, 20/410 and 24/410 screw finishes and as crimp perfume pumps, as part of the bottle set they ship with: one color reference, one sample round, one lead time.
A fine mist sprayer is a pump that breaks a liquid into small droplets as it leaves the actuator, so the product lands as a light, even mist rather than a stream. Each press delivers a measured dose.
The standard specification, and what we tailor for each program. Neck, output and dip tube are confirmed against your formula and your bottle at the sampling stage.
| Specification | Standard | Tailored per program |
|---|---|---|
| Screw neck finish | 18/41020/41024/410 | Matched to the bottle in the set |
| Crimp neck (perfume) | 15 mm | 13, 18 and 20 mm |
| Output per spray | 0.08–0.15 ml | Matched to the bottle size and formula |
| Collar | ПП | Aluminum, electroplated or anodized |
| Overcap | Clear | Color-matched or a decorated fragrance cap |
| Dip tube | Cut to the bottle's internal height | For glass and plastic bottles alike |
| Decoration | — | Screen printing and hot stamping |
| MOQ | 10,000 units per SKU on existing molds | Full-custom tooling quoted per project |
How the sprayer attaches decides whether it can come off again, and how the bottle looks under the cap.
A threaded collar and gasket that can be removed and reattached.
A metal ferrule compressed around the neck by crimping equipment, a permanent bond with the pump hidden under the cap.
A collar that clicks over the neck and can be removed, a middle route between screw and crimp.
Crimp necks are named by diameter. Larger necks take larger pump mechanisms and higher doses.
The neck follows the bottle, and the output follows the neck. Larger sprayers carry larger pump mechanisms and a slightly larger dose for mists that cover more skin or hair.
from a 50 ml bottle at 0.10 ml per spray. The fragrance industry standard for fine mist perfume pumps is about 0.08–0.12 ml per actuation.
A good sprayer produces a fine, even cone of mist with every press, from the first spray to the last. Three things decide it.
On a fragrance or mist bottle, the collar and cap are the finish customers see and hold, and every surface on them can be specified.
Discuss your color and finishChoose a finish
Actuator, collar and cap matched to the bottle from a physical color sample, so the set reads as one set under store lighting.
Production, 10,000 sets 30 days for custom-color pump headsA matte, soft-touch surface on the cap or the bottle.
Frosting adds 5–7 days at samplingColors and gradients across the cap and the bottle, run on our own spraying lines.
Production, 10,000 sets 30 daysChrome, gold, rose gold or brushed collars and caps, matched from a physical sample.
Production, 10,000 sets 35 days for electroplated capsAn aluminum collar or cap, anodized in color, for a true metal surface on the fragrance.
Production, 10,000 sets 45 days for anodized aluminum capsLogos and copy printed or foil-stamped onto the bottle and the collar, from vector artwork built to the product's actual dimensions.
Printing on caps adds 3–4 days at samplingChanges are made on existing tooling, drawn from more than 30,000 ready-to-use molds.
A tooling project: our in-house Mold Manufacturing Center builds a steel mold in 35–40 days.
Standard lead times for fine mist sprayers, counted in days from receipt of vector artwork and payment. Your quotation confirms the timeline for your specification.
Request a timeline for your projectFull-custom tooling is quoted per project. Production files: vector artwork in AI or PDF format, plus Pantone references or physical color samples.
Sampling
Production, 10,000 sets
Tooling and shipping
The questions buyers ask most before they specify a fine mist sprayer. If yours is not here, send it with your formula and we will answer it against the real product.
Ask about your sprayerTypically 0.08–0.15 ml per spray. The fragrance industry standard for fine mist perfume pumps is about 0.08–0.12 ml per actuation; larger 20/410 and 24/410 sprayers for mists and body sprays run to about 0.16–0.18 ml. A 50 ml bottle at 0.10 ml gives about 500 sprays.
The neck follows the bottle. 18/410 suits 15–60 ml perfumes and samples, 20/410 suits 60–150 ml facial mists and toners, and 24/410 suits 120–500 ml body sprays and hair care. The diameter and the thread must both match the bottle exactly.
A crimp pump is compressed permanently onto the neck, giving a secure, tamper-evident seal and a clean silhouette under the cap, the standard for fine fragrance. A screw sprayer can be removed and reattached, which suits refillable fragrance, toners and mists.
Yes, when the pump internals are specified for alcohol compatibility, with parts in materials such as acetal (POM) and HDPE. We test the sprayer with your final formula, because alcohol concentration, oil content and viscosity all change how it sprays.
Yes. Collars and caps can be electroplated in chrome, gold, rose gold or brushed, or finished in anodized aluminum, as well as color-matched, frosted, spray-coated, screen printed or hot stamped.
Crimp necks are named by diameter: FEA 13 for travel sizes, FEA 15 for bottles up to about 50 ml, and FEA 18 and 20 for larger body and fragrance formats. The pump is matched to the bottle's crimp neck.
MOQ is 10,000 units per SKU on existing molds. A pump head sample takes 15–18 days in a stock color and 15–25 days in a specified color; production of 10,000 custom-color pump heads takes 30 days, counted from receipt of vector artwork and payment. Sea freight adds 35–40 days.
Every pump family we make is specified to the bottle it ships with. Explore the rest of the range, or step back to the full pumps overview.
All Pumps
All PumpsEvery pump family, with the spec table, viscosity guide and neck-finish reference.Explore
Сывороточные насосы
Сывороточные насосы0.12–0.25 ml per stroke for serums, essences and facial oils.Explore
Насосы для лосьона
Насосы для лосьона1.0–4.0 ml per stroke for creams, lotions and body care.Explore
Вспениватели
ВспенивателиLiquid in, foam out, for cleansers and hand wash.Explore
Упаковка духов
Упаковка духовFragrance bottles, caps and crimp pumps as one set.Explore
Триггерные распылители
Триггерные распылителиHigher volume and longer reach for salon and larger formats.Explore
17-й этаж, Восточная башня, дом 2,
Инновационный центр Yiyun Tech,
№ 33-13, улица Цзиньши Третья, улица Даюань,
Район Байюнь, город Гуанчжоу,
Провинция Гуандун, Китай
Офис 10, 24-й этаж,
Башня-Один,
943 Шейх Зайд Роуд,
Барша Хайтс (Аль Тания Первая),
Дубай, Объединённые Арабские Эмираты
© Copyright 2026 Jarsking Packaging Все права защищены.
